F 560 A - F 560

F 560
Without automatedtoolholder carriage movement version.

F 560 A - F 560
The sliding table, with long travel stroke, connected to the tool arm carriage, allows the wheel to be easily picked up and positioned on the self centering chuck. The controls are located on a movable stand which allows the operator to work the machine from the position of this choice. Moreover, for the operator's perfect safety, there is a low voltage supply to the controls (24 V).

The universal self centering chuck is activated by a hydraulic cylinder and can lock all rims from 14 to 56 inches from the inside or from the central hole. It can rotate in both directions at two different speeds. Four sheet of metal, prevent squashing between the chuck flanges.

The tool, which may be tilted or swivelled as required, enables every operation to be carried out at top speed. The support system for bead breaker disk, without inside bracket, eliminates all friction, thus improving performance. A mechanical tool arm tip lock device, prevents the arm from being moved to its "non working position" if the tool has been removed.

For total operator safety, a non return check valve, fitted directly onto cylinder, keeps the wheel locked even in case of electrical failure or hose rupture. Moreover, a pilot operated dual seal check valve, prevents the spindle carrier arm from dropping if the hydraulic circuit accidentally breaks.