M 522 2V FS - M 522 2V

WDK Approval when equipped with ALLY 80

Air-operated tilting of column. Pneumatic balancing of tool-holder shaft:

By simply pressing a button, alignment (both horizontal and vertical) is obtained simultaneously with clamping.

Travel roller under horizontal-swing arm to minimise the pull and push effort required.

The table turn in both directions and two speeds are available (6 - 12 rpm) controlled by pedal.
On the FS version, the inflating nozzles, placed on the sliding jaws, adapt automatically to the rim diameter.

The 4 clamp octagonal turntable, can clamping from the outside rims until 22" .
Inside and outside clamps are totally protected by plastic guards (supplied as standard) to prevent damages alloy rims.

The tyre changer is available with or without the tubeless tyre inflation system (FS).

Self centering chuck opening

11" - 22" (><) / 13" - 24" (<>)

Bead breaking power (cylinder)

32,200 N (10 BAR)

Bead breaking blade opening

320 mm

Max. wheel diameter

1060 mm

Wheel width

320 mm

Working pressure

10 BAR

Max. self centering torque

120 Kgm

Motor (double polarity)

0.9/1.2 KW - 3 Ph - 400V - 50 Hz

Turntable speed

6 - 12 r.p.m. (U/min) (2V)

Weight

225 Kg (FS) - 220 Kg

Tyre lever

Set of 4 plastic jaw pads

Filter pressure reducer unit

Cover for tyre lever

Two plastic inserts for tool head

Plastic cover for blade

  
W = 3" - 12"
d2 = 1" - 22"
d1 = 13" - 24"
D = 1060 mm max

Brochure